| Certification: | GS, CE, ISO9001 |
|---|---|
| Pressure: | High Pressure |
| Work Temperature: | High Temperature |
| Voltage: | 12-440V |
| Installation: | Vertical |
| Material: | Cast Steel |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier This power unit is designed exclusively for small tipper, consisting of high pressure gear pump, DC motor, multi-functional manifold, valves and tank, etc. The hand pump with a displacement of 8cc per stroke works as a backup power souce of lifiting the tipper in case of power failure with the lowering movement is activated by the solenoid valve.
Special notes
1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4. The power unit should be mounted horizontally.
5. Check the oil level in the tank after the first star of the power unit.
6. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}